How To Prepare Exterior Trim For Painting

Sanding and Scraping The real bulk of the work in exterior paint prep is surface prep.

How to prepare exterior trim for painting. Preparing Exterior Trim for Painting Step-by-Step Start by scrubbing off all dirt and chalking paint with a scrub brush and a solution of trisodium phosphate TSP. Make sure that you cover any additional hardware on the door with a two-inch blue painters tape at least to ensure that theres no splattering on it later on. Paint all the side edges of trim pieces before painting the front-facing part of.

When youre satisfied with the woods appearance rinse the exterior. How do you prepare exterior door trim for painting. Whether its exterior woodwork like doors and fences or masonry like brick walls and render - creating a clean smooth surface before applying the exterior paint will make for the.

Start by scrubbing off all dirt and chalking paint with a scrub brush and a solution of trisodium phosphate TSP. In this video This Old House host Kevin OConnor and painting contractor Rich ONeil show how to properly prepare a house for paint. Rinse thoroughly with a vinegarwater solution and let the trim.

When working outside it is best to work out of direct sunlight and in temperatures between 50º-90º F with moderate humidity. Rinse the trim thoroughly and allow it to dry completely before preparing the surface for primer and paint. There is no need to mask trim as giving it a body over-spray coat as well.

Allow the primer to dry for 24 to 48 hours next apply two coats of exterior paint. If you are painting entire exterior yourself ideally after spraying siding repainting trim with a brush or roller is your best most quickest method of application. Its important that you use drop cloths to protect the floor and the chairs.

The key to a long-lasting paint job is to prepare the woodwork so its clean and gloss free. Apply an oil-based primer coat to metal doors before you begin painting. To Summarize Prepping Exterior Trim For Paint Sanding filler caulking edges where trim meets another substrate allowing to dry.