How To Make Wooden Spoons On A Lathe
Draw a rough outline of the desire spoon on a piece of wood.
How to make wooden spoons on a lathe. With the lathe off I used a fine tooth hand saw to cut the in-progress cedar spoon off the lathe and my waste pieces. If playback doesnt begin. Once the basic form was achieved he then used a band saw to cut the leg in half and chucked using a special clamp each half back into the lathe to mill away the excess wood.
Using the bandsaw I rough cut the form drawn. See more ideas about wooden spoons wood spoon carved spoons. Cut out the outline of the spoon.
With the dimensions of this board I should be able to make up to 4 spoons. I used a store-bought spoon and used it to trace out the pattern I wanted. Step 3 Cut the spoon out on the bandsaw.
Once the shape of the spoons was created it was then time to refine the design into the actual utensils. On my cut spoon I marked out the edges or walls of the spoon. I use a five or six quarter stock 1-14 or 1-12 inch and draw the spoon on the wood with a magic marker.
How to Create a Wooden Spoon using HAND TOOLS. Pick a location on the board that will allow you to get multiple spoons. Next I go to the lathe and put it between centers and turn it down into a round handle and spoon shaped ball.
I turned the handl. Cutting board oil also works Tools-Wood lathe-Band saw-Belt sander or other electric sander its possible to get away with just hand-sanding but your hands may fall off in the process-Dremel with several drum-sanding bits for carving out the bowl of the spoon. Step 2 Trace the spoon pattern onto the wood with a pencil or marker.
