Make Your Own Wood Turning Lathe

Mount the turning blank on the lathe.

Make your own wood turning lathe. All you need is the desire to have one the gumption to do so and the intestinal fortitude to say I. Ad Easy to Use - Laser Fits in Spindle 4-Axis 00002 resolutn Fast Setup. Ive made a couple of turning tools with carbide cutters and some with HSS cutting blanks all turned out to be very useful.

In your tail stock put the live center. Mine is a 10 pound 125 horsepower motor and it has never slowed down while I am turning something. You lathe should look like this.

You need to move this to the side when you are putting wood onto the lathe. Well properly shaped and machinedthen add a nice wood handle and you have all the tools you need to turn just about. Be sure to cover up the motor and any speed control devices so the brass shavings dont ruin anything.

The main thing is to make sure your motor can spin with both a lot of speed and a lot of power. Use sandpaper to shine up the ferrule. How to Make YourOwn Woodturning Tools.

For a wood lathe a 12 horsepower motor should be enough. Turn the lathe on a slow speed and file the ferrule round. Welcome to the channel Roman Ursu Hack romanursuhack.

Once your lathe is up and running you can start wood turning immediately and begin making. Pick up your spindle blank and alight the awl hole with the point on the drive spur. Ad Easy to Use - Laser Fits in Spindle 4-Axis 00002 resolutn Fast Setup.