How To Use Carbide Turning Tools

Shaping a bowl blank goes pretty quick with a carbide turning tool.

How to use carbide turning tools. Once youve got it lined up the way that you want it use the inside of the carbide insert as a guide and scratch a circle into the steel tool shaft. Honestly I use a HSS roughing gouge for. In this article we describe what the Turning Tool ISO code system is and how you can use it to identify your carbide inserts.

Cutting Power for Turning. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line. Conventional HSS tools like the spindle roughing gouge shown above have the cutting edge ground like a chisel.

Be aware that the carbide inserts are razor sharp. Anatomy of a turning tool Most turning is done using a replaceable insert that is gripped in a turning tool body which is then mounted on the lathe turret. When grinding the turning tool should be placed in the horizontal center of the grinding wheel and the tip of the tool should be slightly upward for about 3 8 When the turning tool contacts the grinding wheel it should move horizontally in the left and right directions.

To begin with if your were searching for wood turning tools with carbide tips you might have a hard time finding them because these special tools are made with carbide inserts. The benefits of using replaceable inserts for turning tools include. Place the tool on the tool rest with the tool shaft parallel with the floor.

Square radius carbide tool. You must use care when handling them so that you dont cut yourself. If one side of a carbide cutting tip wears out depending on the cutter shape the tip can be rotated to a new fresh sharp area.

Wearing heavy gloves is a good idea. In use you angle the tool so the bevel rides the wood then tilt the handle up to begin the cut. Ensure safety guards and goggles are used.