How To Use A Wood Lathe

These machines range in size from hobby models that fit on a work bench to large industrial-sized machines weighing hundreds of pounds but they all share some basic elements.

How to use a wood lathe. Turn on the wood lathe and cut the wood into the desired shape. Ad At Surplex you will find used machinery and industry equipment at best prices. This horizontal beam made from cast iron must be heavy to prevent the mini lathe from vibrating each time wood is being spun by the motor.

Never lean on the lathe. A wood lathe can spin as such a fast speed that can cause the wood to fly off if it is not properly inserted. Know where the emergency stop is before operating the lathe.

Woodturning is the process of carving a block of wood into a symmetrical object such as a wood spindle or bowl while using a motor-driven lathe to spin the wood at high speed while cutting tools including a variety of chisels and knives gradually carve the piece into the desired shape. Never lay tools directly on the lathe ways. Step 3 Use the left hand to guide the tool by holding your hand over the tool near the blade edge.

If a separate table is not available use. Use pliers or a brush to remove chips and swarf never your hands. Observe the proper safety measures when working with a woodworking apparatus.

This is referred to as spindle turning and is the type of woodturning that is done to create long ornate table legs and other long wood turnings. Rotate the lathe at a certain RPM and dont ever forget to. Insert the wood to the lathe chuck and allow the grips to center it.

Handle heavy chucks with care and protect the lathe ways with a block of wood when installing a chuck. Hold the wood lathe tools in your right hand firmly but not overly tight. Just as with the four-jaw chuck screw attachment to attach wood to a lathe using the dedicated screw chuck be sure to seat the blank all the way down to the base for a secure attachment.