How To Prepare Woodwork For Painting Uk
Paint the woodwork undercoat Step 1 Remove fittings and apply masking tape to areas you want to protect on the windows skirting boards architraves and doors.
How to prepare woodwork for painting uk. Lightly coat the wood with your solution three times waiting half an hour between each coat to allow the wood to dry. An undercoat is always a good idea on previously painted surfaces as it will give you a much better finish and stops the paint dragging on the surface. Gentle rubbing works best.
On a standard previously painted finish I would use 120 grade glass paper or sanding sponge. Step 2 Starting with the windows use a small paint brush to give the woodwork an undercoat using interior woodwork primer. Once you have washed the woodwork down allow to dry fully.
Allow the primer to dry then give it a quick sand with a fine sandpaper to smooth it down. Then wash the walls thoroughly with sugar soap and rinse them with clean water to remove any residue. Remove any nails or screws.
Paint the stairs with your primer first. A sanding machine can be used cautiously for a large surface if preferred. If need be place some wood filler onto a filling knife and work it into the wood.
Wear a mask for sanding existing paintwork as older paints contained lead and this can be dangerous. It is a good idea to wash dirt and grime off of the woodwork using either warm soapy water or sugar soap. Next up fill holes and cracks with Polycell Polyfilla and let it dry.
If your wood was painted before you need sand it down with fine-grain sandpaper to create a key for the new paint stick to. Once the final coat has dried you should lightly sand the wood and also apply a coat of primer before painting. How to prepare previously painted woodwork Step 1 Start by checking the woodwork for any holes or cracks.
