How To Prepare Stained Wood Trim For Painting

Allow the deglosser to dry before applying paint.

How to prepare stained wood trim for painting. Thoroughly mix the primer with a paint stick and pour a small amount into a paint tray. Lightly sand all the wood trim using a 220 grit sandpaper. Then wipe down each surface with a tack cloth to ensure no dust was left behind.

There are only a few items required to prep wood trim for painting. Peak Pro Painting offers residential and commercial painting services to the greater Denver m. Dip an angled brush into the primer covering no more than ½ inch to 1 inch of the brush.

Follow the manufacturers recommended drying and painting. Regardless of the religious factor involved in painting hardwood trim lololol if you must do it you need to buff sand the wood 150 or 220 is fine for this step. Peak Pro Painting here to tell you how to paint a stained door.

Rinse thoroughly with a vinegarwater solution and let the trim dry. Vacuum up as much of the dust from sanding as possible. Next to dull the stain.

Applying oil-based or shellac primer is a required step when painting over stained wood. Apply stain-blocking primer to the wood trim using a paintbrush. First clean the stained surface with soapy water to remove any dust dirt and cobwebs.

With this primer your white trim. Paint the trim with deglosser using a 2-inch paintbrush. Wipe off the excess and if you want to sand it lightly but I never doI just wipe off the excess with my finger so just the hole is filled 3 Wipe down all of your trim with a damp cloth.