How To Prepare Stained And Varnished Wood For Painting

First clean the stained surface with soapy water to remove any dust dirt and cobwebs.

How to prepare stained and varnished wood for painting. With your stain sealing primer applied and flatted down the final job is to then apply your top coat paint. You can paint over varnished wood without sanding via using deglosser. Unlike oil paints they wont yellow over time and resist cracking blistering and peeling.

How to Paint Stained Wood. The varnish is not water-proof so avoid extending the interaction time between the wood and wet rag. The stain cant be absorbed into the wood if theres a layer of protective coating on it.

Apply the putty filler with a scraper or a putty knife like the knife from Titan tools or Warner so that it is applied thoroughly and evenly. Sand the surface Start by sanding the surface with a random-orbital sander and 150-grit paper. Purchase My recommended Tools Brushes Paints and Primers Here.

Sanding works well on flat surfaces. Paint on your top coat in the same manner as the sealer using fairly long brush strokes. You dont have to remove the varnish completely just slightly etch the surface so that primer will stick to it.

These fast-drying paints form a tough protective shell that allows you to wipe off greasy stains with soapy water. Sandpaper helps add texture to smooth varnished surfaces for easier painting. The TSP helps get rid of anything that would sit between the paint and wood.

Sand the furniture using 180-grit sandpaper. Then follow these general preparatory steps for painting over stain. Step 1 Sand the stained or varnished furniture using 220-grit sandpaper.