How To Prep Wood For Painting After Sanding
The most important part of finishing a piece of furniture happens before you open a can of stain or paint it starts with the sanding.
How to prep wood for painting after sanding. Once the patch is dry shaped and sanded prime it to protect it from moisture. After youve sanded the wood go over it with a rag to wipe it down and remove any excess material. Use a scraper to remove loose paint from the siding working from every direction.
When lightly wiped over wood surfaces it miraculously picks up dust that vacuuming and dry cloths cannot remove. Dry rags or brushes arent the most effective tools for removing dust. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
How to Prep Sand and Prime Furniture for Paint - YouTube. It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit. You have to mix these setting types of fillers but they stick better to wood than other fillers.
Wipe down your wood and remove any dust. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain. Primer isnt meant to cover completely its okay for the wood to show through.
If you dont wipe down the wood. Prime your piece from top to bottom always looking a little behind for drips. Wood dust from sanding will cause problems if its not removed from the surface before staining.
Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Wipe the folded tack cloth across the wood. Work a paint scraper from every direction keeping the blade flat against the wood so you dont create gouge marks.
