How To Make Wooden Drawer Pulls
I made a simple drill guide out of a scrap of hardwood.
How to make wooden drawer pulls. Using double-stick tape adhere the two 34- thick pull shape platform pieces face down to a scrap piece of 34 plywood or fiberboard. Place the washer on first and then twist the nut onto the screw end until it fits tight against the drawer. These colorful door knobs can be made with the use of some wooden drawer pull decorated with some gold spray paint and other craft paint.
But making drawer pulls with a rou. If it doesnt go at all take a little just a hair off all around and try again. This can be done with a miter saw or a simple hand saw.
Making some wooden drawer pulls out of ironwood for a workbench. Orient the pieces so their bottoms are together creating a lens shape. Drilling through my guide for the holes.
Insert the carriage bolt into the hole for the drawer pull in the drawer front. Perfect for the basement or playroom these fun knobs take a cue from the classic toy LEGOs. Any type of wood can be used for both parts.
How to make 5 different styles of DIY Wooden Drawer Pulls. Some old wooden rulers can be also used as drawer pulls. To assemble the pull place the dowel behind the wood slice and insert the carriage bolt through the drilled holes.
Lay the DIY wooden drawer pulls. I also drilled a hole in the board to make room for the protrusion from the lock. Drawer pull detail A hole can be drilled into the handle and drawer a small wooden peg is inserted into a diagonally drilled hole to keep handle from sliding in any direction.
