How To Make Lathe Tool Handles

The next part was the most difficult.

How to make lathe tool handles. There should be little or no ghosting at the ferrule end. Ad Easy to Use - Laser Fits in Spindle 4-Axis 00002 resolutn Fast Setup. A file on it with the lathe run-ning about 1000 rpm.

I mounted the handle blank in the lathe and turned down one end until the ferrule fit. There are a lot of videos of guys showing how they make their own tools watch them and you will get some good ideasthen perfect a process that matches your needs and abilities. It amounts to turning a spindle drilling a hole to accept the tool and then using epoxy to hold it in place.

Making your own tool handles on the lathe is a really fun projects. Now youre ready to mount the tool to your new handle. It is standard practice to add a ferrule or the equivalent for extra strength where the tool joins the handle.

Ad Easy to Use - Laser Fits in Spindle 4-Axis 00002 resolutn Fast Setup. Place the handles pilot hole against the bit bring up the tailstock and lock it. You can watch a video I put together called How to Make Wood Handles for Wood Lathe Tools it involves taking a small dead tree trunk and turning it into a cylindrical blank to be used for a wood lathe tool handle club mallet or whatever you might desire.

-use a piece of copper pipe as a ferrule when the tool inserts into the wood handle. Time to mount one of the billets in the lathe and make a handle. Turn on the lathe and check to see that the handle runs true.

Use the tailstock hand crank to feed the drill bit into the handle. Im going to be making some handles for a couple of different kitchen tools however you could use the same concepts to make handles for chisels files knives - or whatever you need. To assemble the tool you absolutely want to have the ferrule in place before setting the tool in the handle.