How To Make A Wood Turning Tool Sharpening Jig

How to make the sharpening jig.

How to make a wood turning tool sharpening jig. Shaping skew chisels are pretty easy to do as well. Grind the tip first and then pivot and swing the jig in each direction as shown to create an even grind. Ensure that the raptor tool touches the wheel at two points and is resting firmly in the wolverine jig.

Place the clamping knob at the top of the wood. The Multi-Jig For Sharpening Skew Chisels Gouges Beading Tools and More. Now I glue a piece of plywood to the bottom.

Turn the parting tool over and do the opposite side for the same amount of time. Also after cutting you might want to file all the sharp. If you do it yourself allow some extra length for the 30mm square and angle due to the cutting blade thickness.

Adjust the jigs leg per the manufacturers instructions set it in the V-rest and then slide the rest out so that the center of the bevel rests on the center of the wheel. Insert the tool in a 45 degree holder. Ad Find Deals on Products in Power Tools on Amazon.

Tormek SVS-38 Short Tool Jig - Sharpen Short Woodworking Tools like Short Wood Chisels Carving Gouges Tools for Power Carvers etc. Take the Coach Bolt nut with the end removed and place it on the hole on the hill tilting side. First I cut all the hard plywood pieces with the table saw and make an adjustment groove with the router table in several runs.

I screwed some wood to the back and screwed it onto the left over piece of Oak 34 molding that I used for the other arm. The jig produces razor-sharp tools. Using the raptor set up tool set the wolverine jig arm to the appropriate angle.