How Do You Make A Sharpening Jig For Wood Turning Tools

You can use this to sharpen the following items.

How do you make a sharpening jig for wood turning tools. 516 nuts - at least 4 for the jig. Compare Pricing Distributors Save. To use the jig for an Oland Tool.

With the end of the holder in the jig arm adjust the arm until the tool meets the wheel at 45 degrees. Dont let the weight of a long gouge and handle push the jig forward in the cradle. Compare Pricing Distributors Save.

Chisels gouges bowl gouges spindle gouges carving tools woodturning scrapers parting tools block plane irons and more. Shaping skew chisels are pretty easy to do as well. If you do it yourself allow some extra length for the 30mm square and angle due to the cutting blade thickness.

Turn the parting tool over and do the opposite side for the same amount of time. The end result should be the point of the parting tool be ground to a sharp squared of point. I forgot to take a picture of this step but you can see them in this picture as well.

Then gently push the edge against the wheel. Just ignore those bits in the middle I then bolted the Grinder to the top board centered it as best I could. Dressing the grinder involves using a diamond sharpening tool.

Pivot the tool back and forth over the moving wheel. Ad Find Every Electronic Parts on Octopart. Also after cutting you might want to file all the sharp edges.